Electrician Cost in Hyderabad: 2026 Price Guide & Tips
Looking for a professional? Find verified electrician experts in Hyderabad or browse plumbing in Hyderabad.
Key Takeaways
- ✓Most Hyderabad electricians charge an indicative ₹150–₹400 visiting fee, often adjusted against the job if you go ahead with the work.
- ✓Small jobs such as fixing a switch, socket or light point usually fall in the ₹100–₹500 range per item; fan and light installation is typically ₹200–₹600.
- ✓Wiring, DB/MCB work and inverter installation are priced by scope — always ask for labour and materials to be quoted separately.
- ✓All prices in this guide are indicative estimates, not guaranteed quotations; actual charges vary by area, urgency, materials and the condition of existing wiring.
How Electricians in Hyderabad Usually Charge
Electricians in Hyderabad typically use one of three pricing models, and knowing which one you are being quoted on makes comparison much easier.
Visiting or inspection fee. Many independent electricians and service companies charge a fixed fee simply to come to your home and diagnose the fault. In most parts of the city this is indicatively ₹150–₹400. Some waive or adjust it if you approve the repair; others treat it as a separate charge. Ask before the visit, not after.
Per-point or per-item pricing. Common tasks such as replacing a switch, installing a ceiling fan or fixing a socket are often priced per item. This is the most transparent model for small jobs because you can see exactly what each task costs.
Hourly, daily or project pricing. Larger jobs — rewiring a room, shifting a distribution board, wiring a new flat — are quoted as a project, or as a daily labour rate plus materials. Here the quality of the written quote matters far more than the headline number.
Throughout this guide, prices are indicative estimates based on commonly quoted ranges. They are not verified market rates or guaranteed quotations, and your actual quote may be higher or lower.
Indicative Charges for Common Electrical Repairs
These are typical ranges for labour on everyday repairs in Hyderabad homes. Parts such as switches, sockets, wire or MCBs are usually extra unless the quote says otherwise.
Switch or socket replacement — ₹100–₹300 per point, plus the cost of the switch or socket
Switchboard repair or replacement — ₹250–₹800 depending on the number of modules
Fixing a tripping MCB or RCCB — ₹300–₹900 for diagnosis and repair; a replacement MCB adds the part cost
Short-circuit tracing — ₹400–₹1,500, depending on how long it takes to locate the fault
Ceiling fan repair (capacitor, regulator, bearing) — ₹200–₹600 plus parts
Doorbell repair or replacement — ₹150–₹400
Tube light, LED panel or holder repair — ₹150–₹400
Expect the lower end for a single quick task in an easily accessible spot and the higher end when the electrician must open walls, work at height or trace intermittent faults. If several small jobs are pending, list them all when booking — bundling them into one visit almost always costs less than separate call-outs. For a nationwide view of these numbers, see our electrician charges in India guide.
Indicative Installation Charges
Installation work is where quotes vary the most, because the effort depends on whether wiring and mounting points already exist.
Ceiling fan installation — ₹250–₹600 where a hook and point exist; more if a new point must be run
Light fixture, chandelier or LED panel — ₹200–₹500 for standard fittings; decorative chandeliers can cost ₹800–₹2,500 to mount safely
Exhaust fan installation — ₹300–₹800, higher if a wall cut-out is required
Geyser electrical connection — ₹300–₹800 for the point and connection, excluding plumbing
Inverter and battery installation — ₹500–₹1,500 for a standard home inverter; separate inverter wiring for selected circuits is quoted extra
New electrical point (switch + socket) — ₹400–₹1,200 per point depending on concealed or surface wiring
AC power point with dedicated MCB — ₹800–₹2,000 plus wire and MCB
Distribution board (DB) replacement or upgrade — ₹1,500–₹5,000 in labour, plus the board and breakers
For anything involving new circuits or higher loads — air conditioners, geysers, induction cooktops — confirm that the wire gauge and breaker rating suit the appliance. A cheap installation on undersized wire is a safety risk, not a saving.
Wiring and Rewiring Costs
Rewiring is a project-level job, and Hyderabad quotes are usually given either per point, per square foot, or as a lump sum for the flat.
Partial rewiring of one room — commonly ₹3,000–₹10,000 including labour, depending on the number of points and whether walls are chased
Full rewiring of a 2 BHK — labour and materials together can range widely, often ₹40,000–₹1,20,000, depending on wire brand, concealed versus surface conduit and the number of points
These ranges are rough indicators only. The single biggest variable is materials: branded, ISI-marked copper wire and good-quality switches cost more upfront but are the part you should not economise on. Ask the electrician to list the wire brand and gauge (for example 1.5 sq mm for lighting, 2.5 sq mm for sockets, 4 sq mm for heavy appliances) in the quote.
Older buildings in parts of the city sometimes still have aluminium wiring or no earthing. If your electrician finds either, a rewiring quote is a reasonable recommendation rather than an upsell — but get a second opinion for large jobs.
What Affects the Price
Urgency and timing
Same-day, late-evening, Sunday and festival-season visits usually cost more. Emergency call-outs are covered in the next section.Access and height
Work on high ceilings in duplexes, external walls, or in tight false-ceiling spaces takes longer and needs ladders or scaffolding, which adds cost.Concealed versus surface wiring
Concealed work means chasing walls and patching plaster afterwards. It looks cleaner but costs more in labour, and the patching and repainting are often not included.Materials supplied
Some electricians quote labour only and expect you to buy parts; others supply materials with a markup. Neither is wrong, but make sure you are comparing like with like.Location and travel
Fees can differ between central areas and the expanding outer zones such as the western IT corridor or the northern suburbs, mainly because of travel time. Booking a provider who works near your locality usually helps.Diagnosis difficulty
An obvious loose connection is quick; an intermittent trip that happens only when two appliances run together can take an hour or more to trace.Emergency Electrician Charges
Emergencies — sparking sockets, a burning smell, total power loss in one part of the home, or a breaker that will not reset — justify paying more for a fast response.
As an indicative range, emergency or after-hours visits in Hyderabad often carry a premium of roughly 1.5 to 2 times the normal visiting fee, so something like ₹400–₹800 for the visit alone is not unusual, before any repair or parts. Night-time and monsoon-storm call-outs tend to sit at the higher end.
Before the electrician arrives:
- Switch off the main switch or the affected MCB if it is safe to reach.
- Do not touch sparking or wet sockets, and keep children away.
- Unplug sensitive electronics if you suspect a voltage problem.
- Check whether the outage is building-wide or a TSSPDCL supply issue — if the whole street is dark, an electrician cannot help.
Safety Considerations
Electrical work is one area where the cheapest option can be genuinely dangerous. A few non-negotiables:
Earthing. Every home should have proper earthing, and appliances such as geysers, washing machines and ACs must be earthed. Ask the electrician to test it if you have never had it checked.
RCCB/RCBO protection. A residual-current device trips when current leaks to earth and is one of the most effective protections against shock. If your board has none, ask about adding one.
Correct breaker ratings. Oversized MCBs fitted to stop nuisance tripping defeat the purpose of the breaker. If a circuit trips repeatedly, the cause needs fixing, not a bigger breaker.
Monsoon checks. Hyderabad's heavy monsoon spells expose damp walls, leaking terrace points and outdoor sockets. Have exposed connections and meter-area wiring inspected before the rains.
Our home electrical safety tips cover the warning signs every household should know.
How to Choose a Qualified Electrician in Hyderabad
- Ask about licensing and experience. For significant work, a licensed electrical contractor or a technician with recognised training is preferable. Ask what similar jobs they have done.
- Get the quote in writing. It should list each task, labour, materials with brands, and whether wall patching is included.
- Ask about warranty. Reputable providers offer a short workmanship warranty — commonly anywhere from 30 to 90 days — on repairs.
- Avoid cash-only, no-bill jobs for big work. A bill helps with warranty claims on parts and any follow-up.
- Watch for warning signs. Refusing to switch off the mains before working, pushing for a full rewire without explaining why, or quoting without seeing the problem are all red flags.
- Compare two or three providers. For bigger jobs, comparing quotes on the same scope is the easiest way to spot an outlier.
Frequently Asked Questions
What is the typical visiting charge for an electrician in Hyderabad? Indicatively ₹150–₹400. Some providers adjust it against the repair cost if you proceed; confirm this when booking.
How much does fan installation cost in Hyderabad? Usually around ₹250–₹600 where a hook and point already exist. Running a new point or fixing a new hook costs more.
Are parts included in the quoted price? Often not. Many electricians quote labour only. Ask whether switches, wire, MCBs and fittings are included and which brands will be used.
How much do emergency electricians charge at night? Expect a premium — roughly 1.5 to 2 times the normal visit fee is common. Ask for the exact figure over the phone.
Why does my MCB keep tripping? Common causes are overloading, a short circuit, a faulty appliance or moisture in a connection. A trip is a warning; do not replace the MCB with a higher rating without finding the cause.
How much does full-home rewiring cost? It varies widely with home size, wire brand and concealed versus surface work. For a 2 BHK, combined labour and materials can range from roughly ₹40,000 to over ₹1,00,000. Get itemised quotes.
Can an electrician install an inverter? Yes. Standard inverter and battery installation is indicatively ₹500–₹1,500; separate inverter wiring for chosen circuits is extra.
Do I need earthing for my geyser and washing machine? Yes. Proper earthing and ideally an RCCB on the circuit are important safety measures for appliances used near water.
Are the prices in this guide guaranteed? No. They are indicative estimates to help you budget and compare quotes. Actual charges depend on the provider, the job and materials.
How do I find an electrician near me in Hyderabad? You can browse electrician listings for Hyderabad on FindService.in, compare what each provider offers, and contact them directly.
Need electrical work done? Find electricians in Hyderabad on FindService.in and compare providers before you book.
Find Service Providers