Carpentry in Kolkata
Looking for a reliable carpenter in Kolkata? FindService.in connects you directly with verified carpenters, furniture workshops, modular joinery teams and independent woodworkers who handle wardrobes, lofts, TV units, kitchen cabinets, doors, windows, furniture repair and polishing across Salt Lake, New Town, Behala, Tollygunge, Jadavpur, Garia, Ballygunge, Dum Dum, Shyambazar, Lake Town, Kestopur, Kasba and every other major locality in Kolkata. Carpentry is one of those services where the difference between a good job and a bad one only shows up a year later — the same wardrobe can be built in commercial ply with local hinges or in BWP ply with branded soft-close hardware, and on handover day both look identical. Kolkata's long, humid monsoon and year-round delta moisture are hard on woodwork: low-grade ply swells and delaminates, wardrobe bottoms and kitchen base units fail first, and doors in older flats across Bowbazar, Girish Park and Entally jam every monsoon as frames absorb damp. Termites are a serious factor too — the city's warm, damp soil and old teak-framed houses in North Kolkata need honest inspection before money is spent on refinishing. Every carpenter listed here is manually verified by our team — no middleman, no call centre and no commission cut by FindService.in. You compare profiles, see which parts of Kolkata each professional covers, and contact them directly by phone or WhatsApp to describe the job, share photos or measurements, arrange a site visit and agree the design, material and price before anything is cut.
Top Carpentry Providers in Kolkata
Loading providers…
Why Choose a Verified Carpentry Service?
Verified, contactable carpenters
Every listing is manually checked, so you deal with a real local carpenter or workshop rather than a lead-selling call centre.
Site measurement before quoting
A verified professional measures the space and confirms the design first, instead of quoting a rate over the phone and revising it later.
Material grade stated in writing
Ask for the ply brand and grade — MR, BWP or solid wood — and the hardware brand; verified providers put it on the quote.
Warranty on workmanship and hardware
Serious carpenters give a written warranty on joinery, shutters and the hardware they supply.
Clean, respectful site work
Furniture covered, floors sheeted, cutting done outside the room where possible and debris cleared at the end.
Repair-first advice
A good carpenter tells you when a door can be planed and rehung instead of selling you a new one.
Clear timelines and milestones
You are told how many working days the job needs and when material, carcass, shutters and finishing happen.
Direct contact, no middleman
Call or WhatsApp the provider yourself — FindService.in charges no booking fee and takes no commission.
Why Choose FindService.in?
- Manually verified carpenters and woodwork teams in Kolkata
- Direct phone & WhatsApp contact — no call centre
- No booking fee, no lead reselling, no commission
- Compare multiple carpenters free of cost
- Homes, rentals, offices, shops and societies
- Coverage across every major locality in Kolkata
- Small repairs as well as full custom joinery
- Local language support
Common Carpentry Problems
Swollen and delaminating ply
Kolkata's long, humid monsoon and year-round delta moisture destroy low-grade commercial ply and MDF, starting with wardrobe bottoms and kitchen base units.
Rusted hinges, channels and screws
Trapped damp in older flats across Girish Park, Shobhabazar, Salt Lake and Behala corrodes ordinary hardware until it seizes or snaps.
Doors jamming in the monsoon
Wooden doors and window shutters absorb moisture, swell and refuse to close during Kolkata's long monsoon and post-monsoon humidity.
Sagging shelves and shutters
Damp-softened ply and wide spans make shelves bow and shutters drop out of alignment.
Peeling laminate and open edges
Unsealed cut edges let moisture in behind laminate, which then bubbles and lifts along the exposed face.
Termite damage in frames and skirting
Warm, damp soil makes termites a constant threat to old teak jambs, skirting and furniture in older parts of the city.
Black mould behind wardrobes
Units pushed flush against a damp outer wall trap moisture and develop mould on the back panel.
Drawer channels seizing
Corrosion plus grit makes telescopic channels stiff, noisy and eventually unusable.
Loose sofa and bed frames
Humidity weakens glued joints, so frames creak and flex long before the upholstery wears out.
Locks and latches misaligning
Swelling and shrinking through the seasons shift strike plates so locks stop engaging cleanly.
Loft and wall units loosening
Damp masonry and wrong anchors reduce holding power, making heavy overhead units unsafe.
Squeaking, rubbing shutters
Swollen shutters rub the carcass and dry hinges squeak — usually a planing and hinge-adjustment job, not a rebuild.
Where Carpentry Work Is Done in Kolkata
Service Types
On-site measurement and design
A carpenter visits, measures the space, discusses the design, material and hardware, and gives an itemised quote before work starts.
Custom wardrobes and storage
Full-height wardrobes, sliding and openable shutters, internal drawers, lofts, shoe racks and crockery units built to your exact dimensions.
Modular kitchen carpentry
Base and wall cabinets, tall units, pull-outs, corner solutions and shutter fitting with branded channels and hinges.
Furniture repair and restoration
Repairing sagging shelves, broken frames, cracked panels, loose joints and worn hardware on beds, sofas, tables and chairs.
Door and window work
New door fitting, planing and rehanging, frame and jamb repair, hinge and lock replacement, and window shutter correction.
Hardware replacement
Hinges, soft-close mechanisms, telescopic drawer channels, hydraulic bed lifts, handles, locks, latches and sliding-track repair.
Furniture polishing and refinishing
PU and melamine polishing, duco paint, laminate and membrane refacing and touch-up work on existing woodwork.
Wall panelling and partitions
Decorative wall panelling, headboard panelling, room partitions, study nooks and false walls with concealed storage.
Office and shop carpentry
Workstations, reception counters, storage cabinets, display racks and shop fittings executed to a fixed timeline.
Dismantle, shift and reinstall
Careful dismantling of modular furniture before a move, transport support and correct reassembly at the new home.
Small fittings and odd jobs
Curtain rods, blinds, mirrors, TV mounts, shelves, safety latches, name boards and other short visit-based jobs.
Termite-affected woodwork replacement
Assessing damaged frames, skirting and furniture, replacing affected sections and coordinating with pest control before refitting.
Areas Covered in Kolkata
Verified carpenters listed on FindService.in cover homes, rental flats, villas, offices and shops right across Kolkata, including Madhyamgram, Shyambazar, Salt Lake, Lake Town, Harinavi, Rajarhat, Girish Park, Kestopur, Ballygunge, Park Circus. Coverage, minimum job size and availability vary by provider, so confirm your locality, the type of work and your timeline when you enquire — and share photos or rough measurements on WhatsApp so you get a realistic estimate before the site visit.
Factors Affecting Repair Cost
Scope of work
A single door repair, a full wardrobe wall and a whole-house joinery package sit at completely different price points.
Material and ply grade
Commercial MR ply, BWP marine ply, HDHMR, MDF and solid wood vary widely in cost and in how long they last.
Finish selected
Laminate is the most economical, followed by membrane, acrylic and PU paint, which needs the most site time and skill.
Hardware brand
Local channels and hinges cost a fraction of Hettich, Hafele, Blum or Ebco, but branded hardware is what survives daily use.
Quoting basis
Square-foot rates suit new joinery, per-piece rates suit repairs and day rates suit mixed odd jobs — compare like with like.
Design complexity
Curves, profile shutters, glass inserts, integrated lighting, corner units and pull-out mechanisms all add labour and material.
Site conditions
High ceilings, hard walls, tight staircases, lift restrictions and society work-hour rules all add time to the same job.
Site work vs workshop
Workshop-built carcasses arrive finished and install fast; full on-site fabrication takes longer and creates more dust.
Timeline and urgency
Compressed schedules, weekend work and pre-possession deadlines usually carry a premium over a normal booking.
Quantity of work
Doing several rooms together nearly always gives a better effective rate than calling a carpenter back three separate times.
Costs vary with scope, material grade, finish, hardware brand and site conditions. Always get an itemised written quote after a site measurement — never a rate over the phone — and confirm the warranty on workmanship and hardware.
Maintenance Tips
- 1Insist on BWP marine ply for kitchens, utility areas and anything within a metre of water
- 2Ask specifically for good-quality coated or stainless hardware if your flat has a history of damp walls
- 3Leave a ventilation gap behind wardrobes on outer walls so monsoon damp does not get trapped
- 4Seal every cut edge with edge-banding — in Kolkata humidity an open edge fails within a season
- 5Run exhaust fans in kitchens and bathrooms so moisture does not settle on nearby joinery
- 6Get door bottoms sealed or painted before the monsoon arrives in June to reduce swelling and jamming
- 7Wipe moisture film off hinges and handles periodically and lubricate them lightly
- 8Get an annual termite inspection for teak frames, skirting and older furniture
- 9Fix roof and wall seepage first — repairing woodwork against a leaking wall is wasted money
- 10Do not push furniture flush to a wall that shows damp marks or mould
- 11Tighten hinge and channel screws once a year before they strip the hole
- 12Keep silica or moisture absorbers in wardrobes that stay closed for long periods
Repair or Replace?
Repair or replace? With carpentry the honest answer is usually repair, because most furniture failures are hardware or joint failures rather than structural ones. A wardrobe with sagging shutters, jammed drawers and loose handles is very often a hinge, channel and screw-anchor job that costs a fraction of a rebuild and leaves you with the same carcass you already paid for. A door that will not close is usually planed, its hinges reset and its strike plate moved — replacing it is rarely necessary. Sofas, beds and dining tables built in solid wood are almost always worth repairing, because the frame timber is better than what a comparable new piece would use today. Replacement makes sense in four clear situations. First, when the carcass itself has swollen or delaminated — once low-grade ply or MDF has absorbed water and lost its layers, nothing holds a screw and no repair lasts. Second, when termite or borer damage has hollowed the structural members rather than just the surface. Third, when the repair estimate crosses roughly half the cost of building the same unit new, which is common on cheap ready-made furniture. Fourth, when the design no longer suits the room — no amount of repair fixes a wardrobe that is in the wrong place. In Kolkata specifically, ask the carpenter to press a screwdriver into the base and back panel of any unit you are considering repairing: if the material is soft or crumbling, rebuild that section rather than paying twice.
How to Choose the Right Technician
- 1Ask for a site visit and measurement before accepting any quote
- 2Insist on an itemised written quote naming ply brand, grade, finish and hardware brand
- 3Confirm whether the price is per square foot, per piece or per day
- 4Ask to see photos of similar completed work, ideally in your locality
- 5Agree the working sequence and number of days in writing, with milestones
- 6Check that cut edges will be edge-banded and back panels sealed
- 7Confirm who supplies material and who clears the debris at the end
- 8Ask for a written warranty on workmanship and on the hardware supplied
- 9Hold back a final payment percentage until the snag list is closed at handover
- 10Compare two or three verified carpenters before committing to a large job
Services Offered
- Custom wardrobe design and installation
- Loft and overhead storage units
- TV units and entertainment consoles
- Modular kitchen cabinet carpentry
- Study tables, work-from-home desks and bookshelves
- Storage beds, cots and headboards
- Shoe racks, crockery units and pooja units
- Door repair, planing, alignment and replacement
- Door frame, jamb and architrave work
- Window frame repair and shutter fitting
- Hinge, handle, lock and latch replacement
- Drawer channel and soft-close hardware replacement
- Sofa frame repair and re-webbing
- Dining table and chair repair
- Furniture polishing, PU painting and laminate refinishing
- Modular furniture dismantling, shifting and reassembly
- Wall panelling, partitions and false walls
- Kitchen loft, utility and balcony storage
- Curtain rod, blind, mirror and TV mounting
- Termite-damaged woodwork replacement and treatment coordination
Frequently Asked Questions
How much does carpentry work cost in Kolkata?
There is no single rate, because carpentry is quoted three different ways. Small repairs — a door that will not close, a broken hinge, a jammed drawer channel, a wobbling bed frame, a curtain rod or TV mount — are usually a visit-plus-labour charge with hardware billed separately. Repairs to existing furniture are typically quoted per piece after the carpenter has seen it. New joinery such as wardrobes, lofts, TV units, kitchen cabinets and study tables is normally quoted per square foot of finished carcass, and that figure changes sharply with the material grade you pick (commercial MR ply, BWP marine ply, HDHMR or solid wood), the finish (laminate, membrane, acrylic or PU paint) and the hardware brand (local versus Hettich, Hafele, Blum or Ebco). Site conditions in Kolkata add to it too — high ceilings, hard walls, lift restrictions and society working-hour rules all cost time. What matters more than a headline rate is the paperwork: get an itemised quote naming the ply brand and grade, the hardware brand, the finish, the number of shutters and drawers, the timeline and the warranty. Two quotes that differ by thirty percent almost always differ in material, not in profit.
What is the best ply for Kolkata's humidity and monsoon damp?
BWP (boiling water proof, also sold as marine ply) is the safe specification for anything in a Kolkata kitchen, utility area, bathroom-adjacent wall or on an outer wall exposed to the monsoon. It is bonded with phenolic resin that survives sustained moisture, which ordinary commercial ply does not. For bedrooms, living rooms and study units in dry parts of the house, good branded MR ply is usually enough and costs less. MDF should be avoided anywhere near water in this city — once it takes on moisture it swells permanently and will not hold a screw again. Hardware matters just as much as the ply: in older buildings across Girish Park, Bowbazar and Jadavpur where walls stay damp through the monsoon, use good-quality coated or stainless hinges, channels, screws and handles, because ordinary mild-steel fittings rust and seize within a couple of years. Finally, insist on edge-banding on every cut edge including the hidden ones — in Kolkata, an unsealed edge is where every failure starts.
Should I choose plywood, MDF or solid wood?
For most homes in Kolkata, plywood is the right answer for built-in furniture. BWP (marine grade) ply is the best choice for kitchens, utility areas, bathroom-adjacent joinery and anything on an external wall, because it resists moisture far better. MR (moisture-resistant) ply is fine for wardrobes, TV units and study tables in dry rooms and costs less. HDHMR is a good middle option for painted and membrane finishes because it machines cleanly. MDF is the cheapest and looks perfect when new, but it swells irreversibly once it gets wet, so it should never be used near water or on damp walls — keep it for shutters and decorative work in dry areas. Solid wood — teak, sheesham, rubberwood — is the most durable and the most expensive, and it suits doors, frames, dining tables, beds and anything you want to last decades and be refinished later. A good carpenter will mix these sensibly: BWP for the base, MR or HDHMR for uppers, solid wood for high-stress edges and frames. Be suspicious of any quote that does not name the material at all.
How long does carpentry work take?
It depends entirely on scope. Small repairs — planing a door, replacing hinges or channels, tightening a bed frame, fitting a curtain rod or mounting a TV — take one visit of one to three hours. Repairing or refinishing a single piece of furniture is usually half a day to a day. A single wardrobe built on site typically takes three to six working days including carcass, shutters, hardware and finishing; a workshop-built one installs much faster but needs lead time for fabrication. A full modular kitchen is generally one to two weeks. Whole-house joinery for a 2 or 3 BHK usually runs three to six weeks depending on the number of units, the finish and how many trades are working alongside. Polishing and PU painting add days at the end because each coat has to cure. In Kolkata, factor in society working-hour restrictions and lift availability, which can stretch a schedule. Ask for a written day-wise plan with milestones — material delivery, carcass, shutters, hardware, finishing, handover — so you can tell early if the job is slipping.
Do carpenters bring their own material or should I buy it?
Both models are common and each has advantages. If the carpenter supplies the material, you get a single point of accountability and one number to compare, but you must insist that the quote names the ply brand and grade, the laminate brand and the hardware brand — otherwise there is room to substitute cheaper material after the price is agreed. If you buy the material yourself, you control exactly what goes into your furniture and often pay less for ply and hardware, but you take on the ordering, the wastage calculation and the risk of shortfalls stopping work mid-job. A practical middle path used by many customers in Kolkata is to let the carpenter supply the ply and consumables while you buy the hardware and laminate yourself, because those are the items most often downgraded. Whichever route you choose, ask to see the ply stamp on delivery and keep the hardware boxes until the job is signed off.
Will the carpenter clean up and handle the dust?
A professional will, and you should ask about it before booking. Cutting ply on site generates a lot of fine dust, so a good carpenter sheets the floor, covers or moves furniture, tapes doorways to other rooms, cuts outside the room or in a balcony wherever possible, and clears debris at the end of each day rather than at the end of the job. Many carpenters in Kolkata now bring the carcass pre-cut from a workshop precisely to keep site dust down, and only shutters, edge-banding and fitting happen at your home. If you or your family have asthma or allergies, say so at the enquiry stage and ask for workshop fabrication. Also confirm who disposes of the offcuts and packaging — that should be part of the quote, not an extra you discover at handover.
What warranty should I expect on carpentry work?
Ask for the warranty in writing and be clear about what it covers. Typically you should expect one to five years on workmanship — joints, carcass integrity and installation — depending on the carpenter and the material grade. Hardware carries its own manufacturer warranty, which is one reason branded hinges and channels from Hettich, Hafele, Blum or Ebco are worth paying for; some of their mechanisms carry long or even lifetime warranties. Ply itself carries a manufacturer warranty against borer and delamination when you buy branded BWP or MR grade, and you should keep the bill and the ply stamp photograph for that reason. What is normally excluded: water damage from a leak you did not fix, overloading a shelf or loft beyond its design, damage during a shift or move, and normal wear on laminate surfaces. Get all of this on the quote itself rather than agreeing verbally, and hold back a final payment percentage until the snag list from handover is closed.
Can old furniture and doors be repaired instead of replaced?
Very often, yes, and a good carpenter in Kolkata will suggest it. Doors that stick are usually planed, rehung on new hinges and have their strike plate repositioned. Wardrobes with sagging shutters or dropping drawers usually need hinges, channels and better screw anchors rather than a new carcass. Sofas and beds with creaking frames can be re-joined, re-webbed and reinforced. Solid teak or rosewood furniture, doors and windows found in older homes are almost always worth restoring — sanding, repairing joints and refinishing costs far less than equivalent new solid wood and the timber quality is usually better than anything sold today. Even laminate can be refaced on a sound carcass to change the look of a room cheaply. The honest test is the carcass: if the base and back panels are still firm and hold a screw, repair; if they are soft, swollen or crumbling, rebuild that unit. Ask the carpenter to show you the failure point rather than accepting a blanket recommendation to replace.
How do I protect furniture from termites and moisture?
Start before the furniture is built. Ask for anti-termite treatment on the wall and floor where units will sit, use BWP ply near water, and make sure every cut edge is sealed with edge-banding, because unsealed edges are the entry point for both moisture and borers. Leave a ventilation gap between any unit and an external or damp wall, and paint or seal the rear face of back panels. Fix plumbing leaks and wall seepage before the carpentry, not after — repairing a cabinet against a wet wall simply wastes the money twice. After installation, keep exhaust fans running in kitchens and bathrooms, wipe spills off joints promptly, and inspect skirting, door frames and the backs of old furniture once a year for fine powder, hollow-sounding timber or mud trails. In Kolkata, treat any sign of termite activity as urgent — coordinate pest control first and only then replace the affected woodwork, otherwise the new timber gets attacked too.
Can carpenters dismantle and reinstall modular furniture when I shift?
Yes, and it is worth paying a carpenter to do it rather than leaving it to the packers. Modular wardrobes, beds, TV units and kitchen cabinets come apart at cam locks, dowels and mini-fix fittings that are easy to strip if forced. A carpenter numbers and photographs each panel, bags the hardware by unit, removes shutters and glass separately, and protects edges for transport — then reinstalls square and level at the new home, replacing any fittings damaged in transit. This is a very common request in Kolkata because tenants move often, and it typically costs far less than rebuilding a unit that was broken during a careless move. Book the dismantling a day or two before the movers arrive rather than on the same morning, and tell the carpenter the new flat's dimensions in advance so any resizing can be planned.
Related Articles
Interior Design Trends for Indian Homes in 2025
Discover the latest interior design trends for Indian homes in 2025. From minimalist designs to smart homes, find inspiration for your space.
Home MaintenancePlumbing Maintenance Tips for Indian Homes
Essential plumbing maintenance tips for Indian homes. Prevent leaks, drain clogs, and water damage with these simple DIY tips and tricks.
Home MaintenanceHome Electrical Safety Tips Every Indian Household Should Know
Essential electrical safety tips for Indian homes. Learn about wiring checks, earthing, MCB maintenance, and preventing electrical fires.
Design & BusinessHow to Start a Small Business in India — Beginner's Guide
Step-by-step guide to starting a small business in India. Covers registration, licenses, funding options, digital presence, and growth tips.
Design & BusinessFree Business Listing: Get More Local Customers
Get a free business listing on FindService.in and reach local customers searching for your services across Hyderabad, Bangalore, Chennai and more.
Are You a Carpenter in Kolkata?
List your carpentry business free on FindService.in and reach homeowners, tenants, offices and shops across Kolkata who are searching right now for someone to build, fit or repair their woodwork.
- Verified business profile. Manual verification builds trust with customers who are cautious about letting workers into their home.
- Direct enquiries. Customers call or WhatsApp you directly — no lead reselling and no revenue share.
- Show your specialisation. Highlight modular wardrobes, kitchen carpentry, solid-wood work, polishing, repairs or society projects.
- Cover the areas you serve. List the localities you actually travel to so the enquiries you get are ones you can attend.
Need a Carpenter in Kolkata?
Compare verified Kolkata carpenters, get a site measurement and an itemised quote naming material and hardware, and agree the price, timeline and warranty upfront over phone or WhatsApp.
Explore More
Other services in Kolkata
Browse All Services in Kolkata
Pick another category to find trusted local providers across Kolkata.